Do you have a wireless router that has been quietly serving Wi-Fi to your household for many years? Does it have a thick layer of dust on it? Chances are, if you answered yes to either question, you may not have upgraded your router’s firmware in quite some time. If you have, congratulations, you can stop reading this article right now, if not, read on.

What the Heck is This Firmware Stuff?

Your router’s firmware is basically the operating system that is specifically designed to run on your specific make and model of router (unless you are using a multi-router compatible open source firmware such as DD-WRT). Usually, your router manufacturer will provide firmware updates for your specific make and model of router, via their website, or via a tool within the administrative console of your router (typically accessible via a web browser.)

Why do I Need To Upgrade My Wireless Router’s Firmware?

There are many reasons you may want to consider updating your router’s firmware, here are several of them.

Security Features and Fixes:

One good reason why your router manufacturer may put out a firmware update is because they are trying to fix a vulnerability that was detected in the current firmware, updated firmware is similar to system updates (as in Microsoft’s Windows Update). As bugs are found and corrected, updated firmware is released.

Router manufacturers may also issue a firmware update to upgrade fwatures such as outdated encryption modules or they might add entirely new security mechanisms that weren’t in previous versions of the firmware.

Performance Enhancements

Besides security fixes, your router manufacturer may have found a way to enhance your router’s overall performance, which is always a good thing. If you don’t update your firmware then you won’t be able to take advantage of any speed boosting upgrades that your router manufacturer might release in an update.

How do I Perform a Firmware Upgrade?

Every router is different, but usually they have a similar process for upgrading the router’s firmware. Here are the basic steps for performing a firmware upgrade, check your router manufacturer’s website for specific instructions for your make and model.

Step 1: Login to Your Router’s Administrator Console:

Most modern routers use web browser based administration which means you basically type in the IP address of your router in order to access it’s administrative functions. This IP address is almost always a Private IP address which is usually accessed from inside your home network. This helps prevent outsiders from attempting to administer your router.

Each router manufacturer uses different default addresses so check your specific router manufacturer’s website for details on which one your router may be using. Here are some common default addresses fro some of the more popular wireless router brands.

  • Apple – 10.0.1.1
  • Asus – 192,168,1,1
  • Buffalo Tech – 192.168.1.1
  • Dlink – 192.168.0.1 or 10.0.0.1
  • Cisco/Linksys – 192.168.1.1 or 192.168.0.1
  • Netgear – 192.168.0.1 or 192.168.0.227

After you enter the IP address of your router in your browser’s address bar, you will likely be prompted for the administrator name (typically “admin” or “administrator”) and the default administrator password. These credentials can likely be obtained from your router manufacturer’s website or they might be located on a label on the bottom or back of your router, typically located near the serial number of the router.

Step 2. Locate The Firmware Upgrade Section of the Administrator Console:

Usually there is a dedicated firmware upgrade section within the router administration site. It may be located under the Router Setup page, the “About This Router” page, or perhaps under a “Maintenance” or “Firmware Update” heading.

Step 3. Download and Install The Router Firmware (from a trusted source)

Newer routers will likely make it very easy to download and install the firmware directly from within the router administrative console. Some routers may require that you first save the file to your computer and then select the firmware file via the administration console. Regardless of the method, make sure you are downloading directly from the macnufacturer or from another trusted source (if using open source router firmware). If possible, scan the file for malware before performing the firmware upgrade.

IMPORTANT NOTE: Don’t interrupt a firmware upgrade that is in progress or you could potentially damage (brick) your router. Try to avoid doing an upgrade during a lightning storm as firmware upgrades and power outages don’t mix well.

Optional Step.  Setting up a OpenVPN on DD-WRT routers.  VPN is the “tunneling” of your internet connection to the network you wish to connect to, and possibly access LAN files while away from the home or office.  Follow this link here to get a start on setting up your own OpenVPN Connection. http://compari.tech/dd-wrt-bestvpn

Joseph Forbes (691)

Information Technology Consultant. For SMB, SOHO, and Online business. From Computers to Telecommunications this guy has been into it since hippies made it hip. Drone Pilot and Tech Aficionado I get to travel the State of Texas to help businesses succeed.